Glass bottle cutter: What bottle does it work on?
- Q:
Can it both cut square bottles and round bottles?
- A:Yes, the new version is no longer confined to round bottles cutting, we also design it for cutting square bottles. It can cut the bottlenecks of round bottles as well. You just need to replace the rollers.See the version for cutting square bottles and round bottle: https://www.amazon.com/dp/B07FM838DT.
- Return to Top
- Q:
Can it cut any glass bottle not only wine bottle?
- A:Yes, It can cut any straight round glass bottles and Most of beer/wine/drinking bottles like olive oil, Vodka, Tapered, Champagne, Perrier. And if you buy this version https://www.amazon.com/dp/B07FM838DT, it can cut the bottles mentioned above and unembossed square bottles like the bottle of the Jack Daniel’s whisky.
- Return to Top
- Q:
Can this cut patron bottle?
- A:Yes, It can cut any straight round glass bottles. Most of beer/wine/drinking bottles like patron, olive oil, Vodka, Tapered, Champagne, Perrier... But please note: Cutting Length- from bottle bottom to cutting point: 2''-8.3". Cutting Diameter: 0.5" to 2".
- Return to Top
- Q:
can it be used to cut magnum sized bottles? Would this work on beer bottles (12oz & 22oz)?
- A:The cutting length- from bottle bottom to cutting point: 2''-8.3". Cutting diameter: 0.5" to 2". We suggest that you could confirm the bottle size first.
- Return to Top
- Q:
I want to make wind chimes and just cut two inches off, can i do this?
- A:Yes, you can. The cutting length: from bottle bottom to cutting point: 2"-8.3". Cutting diameter of round glass bottles or mason jars: 0.5" to 2".
- Return to Top
- Q:
Can it cut bottles to a length longer than 9 inches? Want to cut bottom off of bottles and need it to be at least 11 inches.
- A:Yes you can if you are cutting off only the bottoms. You will just need something to support the upper half of the bottle which will be hanging over cutter. The way that the cutter is constructed, you will be losing no less than 2 inches off the bottom.
- Return to Top
- Q:
Does it work on squared bottles?
- A:We're sorry it couldn't, it works for round bottles.
- Return to Top
- Q:
Will this cut a bottle vertically to create a serving dish?
- A:This version can cut square bottles: https://www.amazon.com/dp/B07FM838DT.
- Return to Top
- Q:
Can you cut a bottle on a slant? Or does it have to be a straight cut?
- A:It has to be straight.
- Return to Top
- Q:
what is the maximum size bottle that it will cut (square bottle cutter)?
- A:You can cut almost any size of square and round bottles. The length/height slide adjustment for making the cut is 2.4" to 5.9"(leaving you with cup 2.4" on up to 5.9"). The width spread between the cutting die and support roller is 0.8" to 2.7".
- Return to Top
Glass bottle cutter: About the blade & wheel
- Q:
Can the machine be replaced if needed? And where can I get them?
- A:Yes, please feel free to contact us if you need to replace the machine,we provide a lifetime replacement service.
- Return to Top
- Q:
How many glasses can it cut before the blade loses its effectiveness?
- A:Well over 500 times and the blade is still going strong. Also, we can replace the blades to you if you need.
- Return to Top
- Q:
Are there replacement blades?
- A:yes there is.
- Return to Top
- Q:
where do i buy replacement blades?
- A:A craft shop like Michaels.
- Return to Top
- Q:
How many bottles can be scored before the blade needs to be replaced and where can I get a replacement blade?
- A:Hello, the blade have 3 sides, and each sides can use for many times. If you need the replacement blade, we suggest that you can buy the cutter kit.
- Return to Top
- Q:
Is the cutting wheel steel or carbide?
- A:The cutting wheel is made of sharp and hard metallic-steel.
- Return to Top
Glass bottle cutter: smooth the edge
- Q:
How smooth does the edge get?
- A:It actually cuts it pretty smooth. Once the bottle is cut,smooth the edge with the sandpaper(included).
- Return to Top
- Q:
Is the cut edge rough? How do you smooth it to make a drinking glass?
- A:you can use some emery cloth or sandpaper to smooth it.
- Return to Top
Glass bottle cutter: some problem & suggestions
- Q:
How can I cut the square bottles faster?
- A:Here is a time-saving way to etch the glass: we can etch all corners of bottle at one time while placing the blade in a inclined angle and then etching all the flat surfaces of the bottle by placing the blade vertically.
- Return to Top
- Q:
I can’t get it to score all the way around without large gaps in between. I’m not changing pressure. What am i doing wrong?
- A:Make sure that the scoring wheel is properly rotated, and that the bottle support are adjusted correctly. If when you look at it from the front if the scoring wheel is pressing on the bottle even pressure should produce a perfect score. After that pour hot water over it, then go to cold and it should crack and you could be able to use your hands to separate it. That's how I do it and I cut over a hundred bottles so far, I'm getting better and better with each one, and it is a very fast and efficient method.
- Return to Top
- Q:
I was able to get a nice score on two different bottles and shifted from hot to cold water 5+ times without any luck. Do you have any suggestions?
- A:The best method I've found is to get one good etch in the bottle, then slowly go over that etching with a lighter. Go all the way around, doing your best to only heat the mark. Once finished, plunge bottle into cold water. It should come right off.
It'll take a few practice bottles before you stop getting uneven / cracked bottles.
- Return to Top
Universal Angleizer Ruler: About the details
- Q:
What is the maximum lengths on each side?
- A:10 inches and 5 inches scale.
- Return to Top
- Q:
Is it disassembled?
- A:All of our Tools come preassembled ! No need to put anything together, open the box and start measuring!
- Return to Top
- Q:
What kind of the pouch will it come with, will it be cheap one?
- A:It equipped a luxury velvet pouch. It is durable, convenient to take it out and make it better to prevent from scratch.
- Return to Top
- Q:
What is the material of this multi angle measuring ruler?
- A:Premium alumium alloy.
- Return to Top
- Q:
Are the units laser engraved?
- A:Yes, they are precise and and can last longer for the mark can’t been wiped.
- Return to Top
Universal Angleizer Ruler: About the usages
- Q:
What kind of the project had you done with it?
- A:It is perfect for a handy man job around the house,I had finished my shed with it, it has cut my time in half! It will also be helpful for laying wood flooring.
This aluminum alloy angle ruler can creat specialized angles / shapes for tile, brick, stone, wood, laminate, and more. The ruler is handy for creating bull eyes, arches, plumb cuts and any projects you can think of.
- Return to Top
- Q:
Can it get a precise measurement?
- A:yes there isIt is perfect for precise and accurate angle measurements.
- Return to Top
- Q:
can a router be used on this tool to make inlays?
- A:A craft shop like MichaelsYou can adjust different angle and scale range to different projects.
- Return to Top
- Q:
If properly set will the corner edges be flush for measuring interior angles?
- A:Yes, it can fit with any angles.
- Return to Top
- Q:
Does it just copy/measure existing angles or can I set it to 22.5 degrees and create angles?
- A:It does copy the angles and it will make a 22.5 degree angel or any angel you need, but it doesn't show the angel degree on the actual tool.
- Return to Top